FPGA Alarm

System/Sub-System

MiVoice Business: Hardware

Description

Indicates the presence of a Field Programmable Gate Array (FPGA) mismatch.

Alarm Status

The minor threshold is 100.

Possible Cause	Corrective Action
Hard disk replaced	Enter the UPGRADEBOOTROM ALL maintenance command to upgrade the firmware. After the command is executed, the system prompts you to reboot the controller. Run the RESET SYSTEM maintenance command for the new firmware to take effect. NOTE: If your MXe III/MXe III-L controller has an FPGA alarm, then you must power down and power up the system, instead of a reboot. For more information, see Chapter 6, Maintenance > Power Down the Controller in the Technician's Handbook, Release 9.1.

Possible Cause

Corrective Action

Hard disk replaced

Enter the UPGRADEBOOTROM ALL maintenance command to upgrade the firmware. After the command is executed, the system prompts you to reboot the controller. Run the RESET SYSTEM maintenance command for the new firmware to take effect.

NOTE: If your MXe III/MXe III-L controller has an FPGA alarm, then you must power down and power up the system, instead of a reboot. For more information, see Chapter 6, Maintenance > Power Down the Controller in the Technician's Handbook, Release 9.1.